Červenka Consulting

Metro Extension in Shanghai – Using ATENA to Reach Cost Optimisation

JKP Static modelled a full segmental tunnel ring tested in Shanghai with ATENA and showed that fibres could replace 50 to 75 % of the steel reinforcement.

Peter Karoly Juhasz
JKP Static Ltd., Hungary

JKP Static Ltd. based in Hungary analyzed a one-to-one model of the full tunnel section with ATENA at the Tongji Univesity in Shanghai. At JKP ATENA has been used extensively for completion of their worldwide projects for several years. The issue of efficiency, especially time, material and cost savings, is highly demanded nowadays. Most notably, evaluation of these aspects generally contributes to a succesfull project realization.

In the the first stage of this project, the real deflections of the original RC tunnel were modelled and compared. The numerical model showed excellent correlation with the test results, so in the next stage an optimisation process was started, where steel bars were replaced with suitable fibres. The design process was supported by experimental program, and the numerical simulations in ATENA showed very good correlation with the full-scale physical test results. The numerical modelling in ATENA showed that the significant reduction of steel reinforcement by 50 and 75% respectively could be achieved.

Full-scale test of a segmental tunnel ring in China
Full-scale test of a concrete segmental tunnel ring in China. Still from a JKP Static video.
ATENA model of the fibre reinforced segmental tunnel ring
ATENA model of the fibre reinforced concrete segmental ring, principal stresses. Still from a JKP Static video.
Zeptejte se AI na program ATENA