Červenka Consulting

Research & development

R&D Projects

Projects funded by the Technology Agency of the Czech Republic, the Czech Science Foundation and European programmes. Most of what ends up in ATENA starts here.

Running

TA ČR · SIGMA TQ26000098

SHNIPS

Structural Health and Safety of Nuclear Containments with Innovative Prestressing Systems

The primary objective of the SHNIPS project is to establish an integrated, long-term framework for the structural health evaluation, reliability assessment, and regulatory support of nuclear containment structures utilizing Greased and Sheathed Strand (GSS)…

Červenka Consulting s.r.o. (coordinator) · ENERGOPROJEKT PRAHA s.r.o. …

2026 – 2028
TA ČR · SIGMA TQ16000055

NETFLUX

Neutron flux effect on concrete shield building, from meso scale to structure scale (NETFLUX)

The objective of this project is to investigate the effect of the neutron flux magnitude at the same final fluence on the level of damage of concrete used for shielding ionizing radiation and to use these results to validate the developed software, which will…

Červenka Consulting s.r.o. · Centrum výzkumu Řež s.r.o. …

2025 – 2027
M-ERA.NET 3 TQ05000005

STF4SW

Sustainable Act for Construction Market: A new perspective on passive seismic protection

The project aims to conduct extensive research on physical, chemical, mechanical, and acoustic properties of STF.

University of Pardubice (UPCE, coordinator) · Czech Technical University in Prague (CTU) …

2024 – 2027
GA ČR GA24-10892S

AI4FRACTURE

Machine Learning for Multiscale Modelling of Spatial Variability and Fracture for Sustainable Concrete Structures

AI4FRACTURE develops multiscale modelling methods for fracture initiation, development and localisation in RC structures. Improved fracture patterns and crack widths will be applied in the life-cycle assessment of structural durability and sustainability.

Červenka Consulting s.r.o. · Brno University of Technology (BUT) …

2024 – 2026
TA ČR · Národní centra kompetence TN02000033

NCC for industrial 3D printing

The main objective is to increase the potential of additive technologies through the efficient and environmentally friendly use of raw materials or energy, the development of materials with specific properties and creation of new products, the design of…

Technical University of Liberec (TUL), Institute for Nanomaterials, Advanced Technologies and Innovation (coordinator) · Červenka Consulting s.r.o.

2023 – 2028

Completed

2025 TA ČR · DELTA 2 BRIHIS A concrete bridge health interpretation system based on mutual boost of big data adn physical mechanism 2025 TA ČR · THÉTA TETWIN Digital twin of Temelin NPP containment for aging management within LTO 2025 TA ČR · TREND digiBeton Simulation and design of structures from digital concrete 2025 TA ČR · DELTA 2 CeSTaR 3 Virtual prototyping for green concrete structural design – new multi-spiral reinforced concrete column and steel beam structures 2024 TA ČR · DOPRAVA 2020+ TwinBridge Digital twin for increased reliability and sustainability of concrete bridges 2023 EIG CONCERT-Japan poroPCM Functional POROus cementitious nanocomposites for heat storage in buildings using Phase Change Materials 2022 TA ČR · ZETA RadWaste Development of Coupling Details for Concrete Containers for Radwaste and Spent Fuel and Modeling of Their Long-Term Performance 2022 TA ČR · DELTA 2 CeSTaR 2 Reducing material demands and enhancing structural capacity of multi-spiral reinforced concrete columns - advanced simulation and experimental validation 2021 TA ČR · DELTA Advanced system for monitoring, diagnosis and reliability assessment of large-scale concrete infrastructures 2020 MPO ČR · TRIO IdeMaS Identification of High Performance Cementitious Composites Coefficients 2020 NRG-STORAGE Integrated Porous Cementitious Nanocomposites in Non-Residential Building Envelopes for Green Active/Passive Energy Storage 2020 Uncertainty modelling in safety formats of concrete structures 2019 TA ČR · DELTA CeSTaR Computer simulation and experimental validation - complex service for flexible and efficient design of pre-cast concrete columns with innovative multi-spiral reinforcement 2019 TA ČR · EPSILON Containment Response of Reinforced Concrete and Prestressed Concrete Structures of WWER 1000 Units to Extreme Dynamic Actions for Selected Scenarios of Severe Accidents 2019 Eurostars FibreLAB Virtual Lab for Fibre Reinforced Concrete Design by Simulation Prototyping 2018 TA ČR · DELTA GeoTech4 2018 TA ČR · DELTA digiCON2 Simulation Service for Digital Concrete Production 2017 Project CyberBridge - Cyber-physical bridge assessment system 2016 Epistemic Uncertainty of Crack Models in Reinforced Concrete Structures 2016 Computer Model for Highperformance Fibre Reinforced Concrete Material 2012 Damage Analysis of Reinforced Concrete Structures due to High Temperatures
Zeptejte se AI na program ATENA